Sponsored Content for Marty Moloney

Buxton Resources has nailed a record 124m drill hit at 16.6 per cent total graphitic carbon at its Graphite Bull project, 300km east of Carnarvon, WA. The hole, drilled as part of a 29-hole reverse circulation program, intersected the monster hit at a depth of just 44m and has extended the strike of Graphite Bull by an extra 240m outside the existing resource.

South Perth-based mining giant IGO has passed the $350,000 exploration expenditure threshold required for it to grab a 51 per cent slice of Buxton Resources' promising Copper Wolf project in Arizona. And IGO can now continue on to grab another 19 per cent interest in the joint venture project it shares with Buxton by spending a further $5 million.

Buxton Resources has secured heritage clearance to drill up to 10 holes at its 80sq-km Centurion project in Western Australia's West Arunta region in its search for major iron oxide-copper-gold (IOCG) targets. The principal target is defined by partly-coincident magnetic and gravity geophysical anomalies spanning a surface area measuring about 3500m by 5000m and reporting a 1500 nanoTesla magnetic response and 10.1 milligal gravity response.

Buxton Resources drilling at its Narryer project in WA's Murchison region has intercepted 20m at a grade of 9.06 per cent total graphitic carbon in a 60m thick zone, indicating a possible new graphite province. The discovery, accompanied by recently-acquired electromagnetic (EM) signatures, indicates the existence of near-surface graphite which may have unveiled a new graphite province within the company's ground.

Buxton Resources has wheeled in a reverse-circulation drill rig at its Graphite Bull play in Western Australia's Gascoyne region, eager to unveil the full extent of thick graphitic mineralisation intersected from a recent diamond program. The company says it has squared away several strategic deals, with its drilling and earthworks contractors to partly fund the 5500m program.

Buxton Resources has unveiled a game-changing find at its Graphite Bull play in Western Australia's Gascoyne region, with new results revealing 84.6m of visible graphitic mineralisation. The hit from the company's latest diamond drillhole includes an ultra-wide 50.35m intersection of high-grade material and once assays are confirmed for the latest results, the extent of mineralisation at depth could be doubled.

Buxton Resources' mission to deliver battery anode concentrate material from its Graphite Bull project in Western Australia's Gascoyne region has gained momentum after recent drilling hit multiple new zones of high-grade graphite. The company says substantial graphitic core zones are visible in the first hole from the new campaign as its confidence builds in relation to its chances of delivering significant resource growth.

Buxton Resources has kicked off Aboriginal heritage surveys at its 100 per cent-owned greenfield Centurion prospect in Central Australia as it seeks clearance to fuel its aim to discover a significant iron oxide-copper-gold (IOCG) deposit at the site. The critical surveys are being carried out by members of the Parna Ngururrpa and Ngurra Kayanta traditional owner groups that hold the cultural authority over the land.

Buxton Resources is aiming to get back in the black – the black-coloured carbon at its Graphite Bull project in Western Australia's Gascoyne region, that is – when it kicks off a new diamond drill program to explore deep geophysical targets in the hope of expanding its existing resource numbers. The company's two diamond drillholes have been designed to target potentially significant extensions of its graphite mineralisation.

Buxton Resources is employing a high-tech magnetic survey in a bid to define potential targets for the company's maiden drill program at its recently-acquired Matrix manganese play in Arizona's Mohave county. The survey will be flown at 30m flight lines above the 12-square-kilometre ground that sits on the interpreted western extension of Artillery Peak's 277 million-tonne manganese resource grading at 2.8 per cent.

Buxton Resources has revealed plans to drill-test three new target areas unveiled by high-tech ground moving-loop electromagnetic (MLEM) surveys at its Ranger and Oculus prospects in an upcoming campaign at its Narryer project in Western Australia's Gascoyne region. The company says the surveys provided high-conductance levels up to 10,000 Siemens, indicating the potential for iron-bearing copper-nickel or graphite mineralisation.

Buxton Resources will try to turn a new project in Mohave County into a manganese oasis after today revealing its acquisition of the Matrix project that sits in the north-western region of Arizona. The 12-square-kilometre operation lies adjacent to the world's sixth-biggest manganese resource in terms of contained metal and expands the company's push into the electric vehicle critical minerals space.

A recent drone aeromagnetics survey by Buxton Resources has unveiled a north-east-trending cluster of magnetic anomalies in the south-central part of the company's 100 per cent-owned Wolverine prospect in Arizona. The cluster coincides with the orientation of copper-molybdenum mineralised porphyry dykes, with rock chip sampling yielding 1.2 per cent copper and 383ppm moly next to Buxton's permitted drill site.

Buxton Resources is poised to launch a drilling campaign to pump up the 2014 mineral resource at its Graphite Bull project in Western Australia's Gascoyne region after securing clearance from a recent Aboriginal heritage survey. The company can now complete infill drilling along a 2.1km potential strike zone where drilling last year confirmed further high-grade graphite mineralisation at the project.

Buxton Resources is engaged in a fourth Aboriginal heritage survey at its Graphite Bull project in Western Australia's Gascoyne region in a bid to further expand the area covered by its previous agreements to about 3 square kilometres. The company undertook similar surveys in 2013, 2014 and 2022 as exploration of the area around its original 2014 inferred 4-million-tonne graphite resource has expanded.

Buxton Resources says samples from its Sun Devil and Aztecs prospects in Arizona have revealed geochemical signatures indicating the sites lie above the main copper molybdenum-enriched zone of a typical porphyry system. The 87 rock chip samples yielded results of up to 3.08 per cent copper, 156ppm molybdenum and 9.34g/t silver, strongly indicating the potential for a copper-porphyry target to exist at depth.

Buxton Resources has identified at least two new and untested porphyry copper-molybdenum drill targets at its Sun Devil and Aztecs prospects that form part of its Copper Wolf project in the US State of Arizona. The two “exciting” targets were defined by a combination of new field mapping and historical data including a helicopter-supported exploration program.

Buxton Resources says a second diamond drillhole into the Dogleg prospect it shares with IGO in Western Australia's West Kimberley region has thrown up a 2.89m hit going 4.17 per cent nickel and 0.83 per cent copper from 233.63m. The hole drilled by IGO, Buxton's ASX 100-listed joint venture partner, also reported 0.14 per cent cobalt in the same intercept.

Buxton Resources' growing union with mining giant IGO has set up the company for a big 2024, with the latter pumping in $579,000 to help fund a new exploration campaign at their Copper Wolf joint venture project in Arizona. It comes on the back of a busy financial quarter where Buxton also advanced its Graphite Bull and Quick Shears projects in Western Australia.

Buxton Resources' 100 per cent-owned Graphite Bull Project in WA's Gascoyne region has ticked another milestone with testwork confirming its product is suitable for the manufacture of lithium-ion battery anodes. The testwork verified that uncoated purified spherical graphite (uPSG) made from Graphite Bull deposit concentrate exceeded the 350 mAh/g charging values considered to be ‘good' for uncoated graphite achieving charging values as high as 370 mAh/g.

Buxton Resources says it has seen intense porphyry style veining along with evidence of copper mineralisation in outcrop at its 100 per cent owned Sun Devil prospect in Arizona. The prospect is part of the larger Copper Wolf project and remains undrilled but has historic rock chips as high as 76,800 ppm copper and 93ppm molybdenum.

Buxton Resources has discovered an extension to the porphyry copper-molybdenum system at its Copper Wolf project in Arizona that is not a part of the nearby JV it shares with mining giant IGO. The new “Wolverine” prospect gave up rock chip samples going as high as 14.1 per cent copper and 1160 parts per million molybdenum, suggesting the potential for a fertile porphyry system below.

Buxton Resources has nailed a massive 405.38m intercept at 0.7 per copper equivalent from 608.38m during its maiden drill program testing porphyry mineralisation at its Copper Wolf project in Arizona. The impressive intersection sits below a previous drillhole that returned 83.76m grading 0.9 per cent copper equivalent from 527.91m, which the company says results in an aggregate section of about 485.85m going 0.73 per cent.

Buxton Resources' burgeoning union with mining giant IGO has struck a positive new chord after the latter's first diamond drillhole at their joint venture project in Western Australia's West Kimberley region confirmed high-grade massive nickel sulphides from 179.06m depth. Headline results include 13.24m at 4.35 per cent nickel from 177.34m, with 5.6m at 7.47 per cent nickel from 179.08m.

Buxton Resources says a new geophysics method has helped to define and prioritise shallow potential open-pit graphite targets at its flagship Graphite Bull project in the Gascoyne region of Western Australia. The company says its recent adoption of the Loupe electromagnetics geophysical survey method has led to multiple near-surface new targets being prioritised near its existing inferred resource.

Prospective ground secured by Buxton Resources in WA's West Kimberley in 2015 is now looming as a company game-changer – for more reasons than one as it continues to foster a relationship with mining giant IGO. New nickel-copper sulphides potential revealed today from the joint venture's Quick Shears project could be just the tip of the iceberg for a burgeoning partnership that also includes international exploration.